Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 114

2 Press ZONE 2 or ZONE 3. The remote switches to zone 2 mode or zone 3. 3 Turn on the amplifier in zone 2 or zone 3. 4 Press one of the input buttons on the remote to select the source signals you want to output. For zone 2, analog video and audio signals are output. For the zone 3, only analog audio signals are output. When you select "SOURCE," the signals of the current input are output. 5 Adjust to a suitable volume. • In the case of illustration 1-1 or 2 (page 104), you can only adjust the surround back speaker volume in zone 2 or zone 3. 1 Set "Sur Back Assign" to "ZONE 2" in the Auto Calibration settings menu (page 73). 2 Adjust the volume using MASTER VOL +/- on the remote. • In the case of illustration 1-2 (page 104), adjust the volume using the receiver of zone 2. Tips • Even when this receiver is standby mode (press ?/ 1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the RM-AAL005 remote at the same time (SYSTEM STANDBY). • Only signals from components connected to the analog input jacks are output through the ZONE 2 or ZONE 3 jacks. No signals are output from components connected to only the digital input jacks. • When "SOURCE" is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when MULTI IN is selected. The analog audio signals of the current function are output. 114GB