Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 38
: Navigating through menus, To switch the command mode, of the remote
View all Sony STR-DA5200ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
To switch the command mode of the remote 1 1 2 3 1 Press ?/1 while pressing RM SET UP. The RM SET UP button flashes. 2 Press 1 or 2 while the RM SET UP button is flashing. When you press 1, the command mode is set to AV SYSTEM 1. When you press 2, the command mode is set to AV SYSTEM 2. 3 Press ENTER when the RM SET UP button lights up. The RM SET UP button flashes twice, then the command mode setting process is completed. Tip When you press RM SET UP, use a thin wire, such as a paper clip. 7: Navigating through menus Press MENU, then display a menu on the TV screen connected to this receiver. You can set up menus easily. By using the amplifier menus, you can make various adjustments to customize the receiver. Refer to "Operating without a GUI (Graphical User Interface)" (page 109) when you operate this receiver without displaying the menu on the TV screen. 2 3 4 RETURN/ EXIT O 5-8 MENU 1 Connect a TV monitor to this receiver. Refer to "3: Connecting the monitor for displaying menus" (page 19). 2 Turn on the receiver and the TV. 3 Press RECEIVER to enable receiver operation. 38GB