Sony XAV-601BT User Guide - Page 64

Disc operation The disc cannot be loaded. • Another disc is already loaded. • The disc has been forcibly inserted upside down or in the wrong way. The disc does not play. • The disc is defective or dirty. • The disc is not playable. • The DVD is not playable due to the region code. • The disc is not finalized (page 57). • The disc format and file version are incompatible with this unit (page 10, 57). • Press Z to remove the disc. MP3/WMA/AAC/Xvid/MPEG-4 files do not play. • Recording was not performed according to the ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format ( DATA CD), or the UDF Bridge format (DATA DVD) (page 57). • The file extension is incorrect (page 58). • Files are not stored in MP3/WMA/AAC/Xvid/ MPEG-4 format. • If the disc contains multiple file types, only the selected file type (audio/video) can be played. t Select the appropriate file type using the list (page 24). MP3/WMA/AAC/Xvid/MPEG-4 files take longer to play than others. The following discs take a longer time to start playback. - a disc recorded with a complicated tree structure. - a disc recorded in Multi Session/Multi Border. - a disc to which data can be added. The disc does not start playing from the beginning. Resume playback or multi-disc resume playback (page 54) has taken effect. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. • Use the DVD menu instead of the direct selection button on the remote commander (page 19). • Multilingual tracks, multilingual subtitles, or multi- angles are not recorded on the DVD. • The DVD prohibits changing. The operation buttons do not function. The disc will not eject. Press the reset button (page 14). USB playback Items cannot be played via a USB hub. This unit cannot recognize USB devices via a USB hub. Items cannot be played. Reconnect the USB device. The USB device takes longer to play. The USB device contains large-sized files or files with 64 a complicated tree structure. The sound is intermittent. • The sound may be intermittent at a high bit rate of more than 320 kbps. • During USB Video playback, if the playback is intermittent: - Press (HOME) or launch the System settings. - During the USB Photo, (Navigation), etc. Bluetooth function The other Bluetooth device cannot detect this unit. • Set "Signal" to "ON" (page 42). • While connecting to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices. Connection is not possible. Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone. • Raise the volume while receiving a call. • Depending on the connecting device, the ringtone may not be sent properly. t Set "Ringtone" to "Internal" (page 41). The talker's voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the "MIC Gain" level (page 39). Echo or noise occurs during call conversations. • Reduce the volume. • "Speech Quality" is set to "Mode 1." t Set "Speech Quality" to "Mode 2" (page 41). • If ambient noise other than the phone call sound is loud, try reducing this noise. t Shut the window if road noise is loud. t Lower the air conditioner if the air conditioner is loud. The phone sound quality is poor. Phone sound quality depends on reception conditions of the cellular phone. t Move your car to a place where you can enhance the cellular phone's signal if the reception is poor. The volume of the connected Bluetooth device is low or high. Volume level will differ depending on the Bluetooth device. t Reduce the volume level differences between this unit and the Bluetooth device (page 42). No sound is output during audio streaming. The connected Bluetooth device is paused. t Cancel pause of the Bluetooth device.