TEAC NP-H750 NP-H750 Owner's Manual - Page 52
Updating the firmware, Cautions when updating the firmware, Turning the timer off - update
View all TEAC NP-H750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting the wake-up timer (2) Updating the firmware (1) 3 Press the ENTER button. 4 Prepare the playback source. Before setting the wake-up timer, connect the input source to be used and adjust the volume. ppAUX 1, AUX 2, iPod, OPTICAL and COAXIAL can be used as input sources for the wake-up timer. ppIf the input source is an iPod, it will start playing automatically. Other types of sources will not play automatically, so they must be playing back at the On Time or no audio will be output. (Use the timer function of the input device to start its playback, for example.) ppPlayback will not occur if a USB flash drive is connected. Using the latest firmware file that is available on the internet, you can update this unit's firmware (built-in program that controls the unit). We recommend that you use the unit with the latest firmware because updating the firmware to the latest version can add more functions to or improve the stability of the unit. Cautions when updating the firmware ppIf the following window is displayed on the screen during the update process, the unit's firmware is being updated. Please wait. 5 Press the STANDBY/ON button to put the unit in standby. This completes setting the wake-up timer. Turning the timer off When not using the timer, press the remote control's TIMER button to select "Timer Off". The timer indicator " " disappears from the display. ppDuring the update process, do not put the NP-H750 into standby, or do not turn off the power of the computer or any network peripherals (access point, router, splitter, repeater, etc.) that are required for Wi-Fi communication. Do not unplug those power cords, either. WARNING Putting the unit into standby or unplugging the power cord of the devices mentioned above as well as power outage may interrupt the update process and may result in permanent damage to the unit. ppIf the following message appears, do not click OK before the unit restarts automatically. If you click OK by mistake before the unit restarts, the webpage will not appear. 52