TEAC NP-H750 NP-H750 Owner's Manual - Page 9
Connecting speakers, Speakers, Subwoofer - b black
View all TEAC NP-H750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH Connecting speakers (1) V Precautions when making connections ppComplete all other connections before connecting power plugs to power outlets. ppRead the owner's manuals of all devices that will be connected, and follow their instructions. ppDo not bundle connecting cables with power cords. Doing so could cause noise. Speakers A SPEAKERS terminals Connect speakers to this unit using commercially available speaker cables. This unit's + (positive) terminals are red ( for the right speaker) and white (for the left speaker). The black speaker terminals are ^ (negative). Generally, the ¥ wire of the speaker cable is marked to make it distinguishable from the ^ wire of the cable. Connect the marked wires to the red and white ¥ terminals and the unmarked wires to the black ^ terminals. ppCheck the impedance of your speakers. Connect speakers with an impedance of 6 ohms or more. Before connections 1. Remove about 1 cm (1/2") of the sheath at the end of the speaker cable. 2. Twist the cable core well. A B RCA cable Making cable connections 1. Turn the terminal cap counterclockwise to loosen it. 2. Insert the wire into the hole in the terminal screw and turn the terminal cap clockwise to connect it securely. LINE IN Subwoofer V CAUTION If the exposed end of a core wire in a speaker cable contacts another cable or terminal, a short could occur. Do not allow this to happen. 9