Thermador CIT367YGS Instructions for Use - Page 24
Overview of the Home Connect™ settings, Changing settings via the Home Con, nect™ app
View all Thermador CIT367YGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
en-us Home Connect™ 3. Follow the instructions in the Home Connect™ app. 7.2 Overview of the Home Connect™ settings You can adjust the settings and network settings for Home Connect™ in the basic settings for your appliance. Setting Selection or display Description and additional information - Not connected/disconnect network - Connect automatically - Connect manually - Connected Log the appliance on in the home network (Wi-Fi) or disconnect from the network. - Not connected - Connect Connecting to the app The setting is only displayed if the appliance is connected to the home network. - Wireless module switched off - Wireless module switched on Connection to the (Wi-Fi) If (Wi-Fi) has been activated, you can use the Home Connect™ functions. In networked standby mode, your appliance requires a maximum of 2 W. The setting is only displayed if the appliance has been previously connected to a network. - Switched off - Switched on Set using the app If the setting is switched off, only the cooktop's operating statuses will be displayed in the Home Connect™ app. - Update available and ready for instal- Software update lation The setting is only displayed if a software update is avail- - Start installation starten able. - Not authorized - Authorized Controlling remote access by Customer Support The setting is only displayed if after-sales service is attempting to connect to the appliance. You can end this at any time after granting access. - Not connected to the home network (Wi-Fi) - Signal strength 1 (poor) - Signal strength 2 (moderate) - Signal strength 3 (good) Display Wi-Fi signal strength The setting is only displayed if there is a connection to the home network (Wi-Fi). - Not connected - Connected Connection to Home Connect™ server The setting is only displayed if there is a connection to the home network (Wi-Fi). 7.3 Changing settings via the Home Connect™ app You can use the Home Connect™ app to change the settings for the cooking zones and send them to the cooktop. Requirements ¡ The appliance is connected to the home network and to the Home Connect™ app. ¡ In order to set the hob via the app, the basic setting must be switched on. ¡ The hob is switched on. 1. Select the setting in the Home Connect™ app and send it to the cooktop. Follow the instructions in the Home Connect™ app. 2. If the setting was previously , two steps are required: ‒ If CONFIRM flashes, touch CONFIRM. ‒ If the cooking zone display alternately flashes the old and new value, select the cooking zone. 3. If the setting was not previously , the old and new value alternately flash directly on the cooking zone display. ‒ To accept the setting for the cooking zone, select the cooking zone. 4. To discard the setting, touch any other button on the cooktop. 24