Toshiba M205-S810 Toshiba Online Users Guide for Portege M200/M205 - Page 49
Installing a memory module, memory to run your current applications. However, if your - bios
![]() |
UPC - 032017236677
View all Toshiba M205-S810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Getting Started Setting up your computer 49 Installing a memory module Your computer is equipped with two memory slots which can provide for various memory configurations. When additional memory is added, or original memory replaced, it is recommended that you use only compatible memory. In the event original memory is replaced with invalid memory, the system will beep and will not boot beyond the BIOS memory check. A message may display. If this occurs, contact Toshiba's support center at (800) 457-7777. Since your computer was built to order, it should have enough memory to run your current applications. However, if your requirements change, you can install extra memory. Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips no.1 screwdriver for this procedure. To avoid damaging the computer's screws, use a standard Phillips no. 1 screwdriver that is in good condition. Do not install or remove a memory module while any internal or external drive power is on. Installing a memory module with the computer's power on may damage the computer, the module, or both. Make sure that the computer is not in Hibernation or Standby mode (see "Hibernation command" on page 146 and "Standby command" on page 147 for more information).
![](/manual_guide/products/toshiba-m205s3217-toshiba-online-users-guide-portege-m200m205-9bde12b/49.png)