Viking VMOS Use and Care Manual - Page 15
Sensor Options
View all Viking VMOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Sensor Options The Sensor is a semi-conductor device that detects the vapor (moisture and humidity) emitted from the food as it heats. The sensor adjusts the cooking times and power level for various foods and quantities. USING SENSOR SETTINGS: 1. After microwave oven is plugged in, wait 2 minutes before using SENSOR OPTIONS. 2. Be sure the exterior of the cooking container and the interior of the microwave oven are dry. Wipe off any moisture with a dry cloth or paper towel. 3. The microwave oven works with foods at normal storage temperature. For example, popcorn would be at room temperature. 4. Any SENSOR OPTIONS selection can be programmed with More or Less Time Adjustment. See page 27. 5. More or less food than the quantity listed in the chart should be cooked following the guidelines in any microwave cookbook. 6. During the first part of SENSOR OPTIONS, the food name will appear on the display. Do not open the microwave oven door or touch Stop/Clear during this part of the cooking cycle. The measurement of vapor will be interrupted. If this occurs, an error message will appear. To continue cooking, touch the Stop/Clear pad and cook manually. When the sensor detects the vapor emitted from the food, remainder of cooking time will appear. The door may be opened when remaining cooking time appears on the display. At this time, you may stir or season food, as desired. 7. If the sensor does not detect vapor properly when popping popcorn, the microwave oven will turn off, and the correct time of day will be displayed. If the sensor does not detect vapor properly when cooking other foods, ERROR will be displayed, and the microwave oven will turn off. 8. Check food for temperature after cooking. If additional time is needed, continue to cook manually. 9. Each food has a cooking hint. Touch Help pad when the HELP indicator is lighted in the display. COVERING FOODS: Some foods work best when covered. Use the cover recommended in the SENSOR OPTIONS chart for these foods. 1. Casserole lid. 2. Plastic wrap: Use plastic wrap recommended for microwave cooking. Cover dish loosely; allow approximately ½ inch to remain uncovered to allow steam to escape. Plastic wrap should not touch food. 3. Wax paper: Cover dish completely; fold excess wrap under dish to secure. If dish is wider than paper, overlap two pieces at least one inch to cover. Be careful when removing any covering to allow steam to escape away from you. Example: You can cook many foods by simply selecting the food and touching Start/Touch On. You don't need to calculate cooking time or power level. • Suppose you want to reheat canned chili. 1. Touch Reheat pad. 2. Touch Start/Touch On pad. When the sensor detects the vapor emitted from the food, the remainder of cooking time will appear. Note: The Fresh Vegetables and Poultry settings have 2 choices. Follow directions in the Interactive Display to choose desired option. Operation 15 E