Yamaha AW1600 Owner's Manual - Page 134
EXCHANGE, TIME COMP/EXP (Time Compression/Expansion), For an audio track, If you set Ratio = 50
View all Yamaha AW1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
List of editing commands EXCHANGE Exchanges data between the specified tracks. 12 3 TIME COMP/EXP (Time Compression/Expansion) Adjusts the length of the specified region of an audio track, without changing the pitch. 12 34 45 6 ● For an audio track From Track 1 2 3 4 5 6 To Track A B C D E F EXCHANGE From Track A B C D E F To Track 1 2 3 4 5 6 ■ Parameter list 12 Track editing Parameter Range Explanation 1-16 A single audio track 1 From TR 1/2-15/16 A pair of adjacent odd-numbered/ even-numbered audio tracks ST The stereo track 2 From V.TR 1-8 Exchange-source virtual track number 3 Name Up to eight alphanumeric characters Exchange-source virtual track name (display only) 4 To TR*1 1-16 1/2-15/16 A single audio track A pair of adjacent odd-numbered/ even-numbered audio tracks 5 To V.TR 1-8 Exchange-destination virtual track number 6 Name Up to eight alphanumeric characters Exchange-destination virtual track name (display only) *1. The items that you can select in 4 To TR (copy-destination track) will depend on the 1 From TR (copy-source track) setting. If 1 From TR is a single audio track 1-16, you can select only a sin- gle audio track 1-16. If 1 From TR is ST or 1/2-15/16 (a pair of adjacent audio tracks), you can select only 1/2-15/16 (a pair of adjacent audio tracks). NOTE • The track names will not be exchanged. 5 6 ● If you set Ratio = 50% From Start From End 1 2 3 4 1 234 To END A B C D TIME COMP/EXP A B C D ● If you set Ratio = 200% From Start From End 1 2 3 4 TIME COMP/EXP 1 2 3 A B C D 4 C D To END ■ Parameter list Parameter 1 From TR 2 From V.TR 3 From Start 4 From End 5 To End 6 To Ratio Range Explanation 1-16 A single audio track 1/2-15/16 A pair of adjacent odd-numbered/ even-numbered audio tracks ST The stereo track 1-8 Virtual track number Specify a point Beginning of the edited region Specify a point End of the edited region Specify a point Specify the length to which the selected region will be compressed or expanded 50-200% Specify the percentage by which the selected region will be compressed or expanded NOTE • To End and To Ratio are linked, so that editing one field will cause the other field to change. • You cannot set To End or To Ratio to a value that would cause the ratio to exceed 50-200 percent. • From Start value and From End value must be at least 45 msec apart. These cannot be set to a shorter interval. 134 AW1600 Owner's Manual