Yamaha AW1600 Owner's Manual - Page 85

Using the internal effects via send/return Using the internal effects via send/return You can use the internal effects via send/return to add effects to the mixdown. As an example, here's how to use internal effect 1 in this way. ■ Internally connecting an internal effect via send/return The "Track recording" chapter explained how to insert an internal effect into an input channel by using the input library. If an insert effect has been inserted in a channel, you must first "un-insert" that effect (cancel the insertion) before you can use it in a send/return configuration. 1 Press any [INPUT SEL] key to select an input channel for operations. 2 Repeatedly press the [EFFECT 1] knob or hold down the [EFFECT 1] knob and use the CURSOR [ ]/[ ] keys to access the SEND page of the EFF1 screen. The SEND page of the EFF1 screen will appear. 1 ■ Adjusting the effect send level Here's how to load an effect library into internal effect 1, and adjust the level (effect send level) of the signal that is sent from each channel via effect bus 1 to internal effect 1. 1 Repeatedly press the [EFFECT 1] knob or hold down the [EFFECT 1] knob and use the CURSOR [ ]/[ ] keys to access the LIBRARY page of the EFF1 screen. 2 Select the effect library that you want to use, and load it into internal effect 1. In this example, we will select a reverb-type library. 1 EFF INSERT Inserts/cancels an insert effect for a specific channel. The display will indicate "on" for a channel into which an effect is currently inserted. HINT • If the page you see is different than shown above, make sure that input channels are selected as the object of your operations. (This is shown in the upper left of the screen.) If track channels are selected, press one of the [INPUT SEL] keys. 3 Move the cursor to the EFF INSERT field of the channel into which effect 1 is inserted, and press the [ENTER] key. A popup window will ask you to confirm that you want to cancel (release) the effect insertion. 4 Move the cursor to the OK button and press the [ENTER] key. Insertion of insert effect 1 into that channel will be cancelled, and now you are free to use this effect in the mixer section via send/return. 3 Press the [EFFECT 1] knob once to access the SEND page of the EFF1 screen. 9 If insert effect 1 is connected via the mixer section send/return, the following items will be added to the SEND page of the EFF1 screen. 1 Mixdown and bounce operations 2 1 EFF Adjusts the send level of the signal that is sent from each channel to insert effect 1. B PRE/POST Selects the location from which the signal from each channel will be sent to insert effect 1. Move the cursor to this area and press the [ENTER] key to switch between the following two settings. • PRE (pre-fader) ......... The signal from immediately before the fader will be sent. • POST (post-fader)..... The signal from immediately after the fader will be sent. AW1600 Owner's Manual 85