Yamaha AW1600 Owner's Manual - Page 160
When Ctrl Chg Mode = 1, Gmidi Ch Hpgm Chg Mode Ictrl Chg Mode
View all Yamaha AW1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Setting MIDI messages G MIDI CH Selects the MIDI channel that will be used to transmit and receive MIDI messages such as program changes and control changes. This area contains the following two items. • TX Selects the transmit MIDI channel, in a range of 1-16. While MIDI messages are being transmitted, the characters "TX" will be highlighted. • RX Selects the receive MIDI channel, in a range of 1-16 or ALL. If you select ALL, MIDI messages of all MIDI channels will be received (Omni mode). While MIDI messages are being received, the characters "RX" will be highlighted. H PGM CHG MODE Switches program change transmission and reception on/ off. If program change reception is on, the AW1600 will recall the corresponding scene when it receives a program change at the MIDI IN or USB connector. If program change transmission is on, the AW1600 will transmit the corresponding program change from the MIDI OUT/ THRU or USB connector when a scene is recalled on the AW1600. You can select the following choices. • OFF...........Program changes will not be transmitted or received. • TX Program changes will only be transmitted. • RX Program change will only be received. • TX-RX .......Program changes will be transmitted and received. HINT • In the SCENE screen PC TABLE page you can specify the scene number that will correspond to each program change number (→ p. 173). 14 MIDI and utility functions I CTRL CHG MODE Specifies how control changes will be transmitted and received. If control change transmission and reception are enabled, the corresponding control change will be transmitted when you operate a mix parameter (fader, pan, effect send, etc.) for track channel 1-16 on the AW1600. When a control change is received, the corresponding mix parameter will change. You can select one of the following choices. • OFF...........Control changes will not be transmitted or received. • 1 Control changes will be transmitted and received on MIDI channels 1-16. (MIDI channels 1-16 will correspond to AW1600 track channels 1-16.) • 2 Control changes will be transmitted and received only on the MIDI channel that is selected in the MIDI CH field. (This mapping is compatible with the other AW-series.) • 3 This is the same as 2 in that control changes of only one MIDI channel are received and transmitted, but the parameter mapping differs from 2. (A single MIDI channel will correspond to AW1600 track channels 1-16.) HINT • For details on the mix parameters that correspond to each control change, refer to the tables that follow. • When you operate a mix parameter of track channel 9/10-15/16 on the AW1600, two types of control changes will be transmitted. ● When CTRL CHG MODE = 1 MIDI CH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CC# 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 7 10 91 93 PARAMETER TRACK CHANNEL 1 FADER PAN EFF1 SEND EFF2 SEND TRACK CHANNEL 2 FADER PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 3 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 4 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 5 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 6 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 7 PAN EFF1 SEND EFF2 SEND TRACK CHANNEL 8 FADER PAN EFF1 SEND EFF2 SEND TRACK CHANNEL 9 FADER PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 10 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 11 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 12 PAN EFF1 SEND EFF2 SEND FADER TRACK CHANNEL 13 PAN EFF1 SEND EFF2 SEND TRACK CHANNEL 14 FADER PAN EFF1 SEND EFF2 SEND TRACK CHANNEL 15 FADER PAN EFF1 SEND TRACK CHANNEL 16 EFF2 SEND FADER PAN EFF1 SEND EFF2 SEND 160 AW1600 Owner's Manual