Yamaha AW1600 Owner's Manual - Page 98
Yamaha AW1600 Manual
View all Yamaha AW1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Convenient functions during mixdown/bounce operations Mixdown and bounce operations D USED AS Indicates how this effect is being used. If the effect is internally connected to the mixer section via send/ return, this will indicate "EFF1" or "EFF2." If the effect is inserted into a specific channel, this will indicate the name of the channel into which the effect is inserted (e.g., "INPUT 1"). E Parameter page/Return channel page In this area you can edit the various effect parameters. The content and range of the parameters will depend on the currently-used effect type. If the effect is internally connected to the mixer section via send/return, this area will show the mix parameters of the return channel, allowing you to edit them. 3 Move the cursor to the effect parameter that you want to edit, and turn the [DATA/JOG] dial to edit the value. Depending on the effect type, this area may be used to show multiple parameter pages. In this case, repeatedly press the CURSOR [ ] key to access the parameter page that contains the parameter you want to edit. For example, the illustration below shows the parameter pages for the STEREO DELAY effect type. 9 MIX BAL. parameter HINT • The parameter pages show the parameters that are specific to that effect type. However for all effect types, the lower right of the last parameter page will have a MIX BAL. parameter which sets the mix balance between the effect sound and the original sound. 4 To edit the mix parameters of the return channel, access the last parameter page, and then press the CURSOR [ ] key once again. If the effect is internally connected to the mixer section via send/return, you can repeatedly press the CURSOR [ ] key to access the mix parameters of the return channel. The following pages are the same for all effect types. 1 2 3 4 5 6 1 EFF2SEND Adjusts the level at which the signal is sent from the return channel to the other internal effect. NOTE • You cannot send the signal from return channel 1 to insert effect 1 (since this would mean sending the signal back to the same effect itself). For this reason, the EDIT page of the EFF1 screen has no send level to effect 1. For the same reason, the EDIT page of the EFF2 screen has no send level to effect 2. B AUX1SEND C AUX2SEND These adjust the send level of the signal that is sent from the return channel to AUX buses 1/2. D EFF2 PRE/POST Switches the signal that is sent from the return channel to the other effect bus between pre-fader and postfader. E AUX1 PRE/POST F AUX2 PRE/POST These switch the signals that are sent from the return channel to AUX buses 1/2 between pre-fader and postfader. 1 2 3 4 5 6 1 EQ HIGH GAIN B EQ HIGH FREQ C EQ HIGH Q D EQ H-MID GAIN E EQ H-MID FREQ F EQ H-MID Q These specify the gain, frequency, and Q for the HIGH and HI-MID bands of the return channel EQ. The range of each parameter is the same as in the EDIT page of the EQ screen. 98 AW1600 Owner's Manual