Yamaha AW1600 Owner's Manual - Page 197
Rev->pan, Delay+er
View all Yamaha AW1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Effects Parameters ■ REV->PAN Parameter REV TIME INI.DLY HI.RATIO DIFF. DENSITY HPF LPF FREQ. DEPTH DIR. WAVE REV BAL. MIX BAL. Range Description 0.3 - 99.9 s Reverb time 0.0 - 500.0 ms Initial delay before reverb begins 0.1 - 1.0 High-frequency reverb time ratio 0 - 10 Reverb diffusion (left-right reverb spreed) 0 - 100% Reverb density Thru, 21.2 Hz - 8.0 kHz High-pass filter cutoff frequency 50 Hz - 16.0 kHz, Thru Low-pass filter cutoff frequency 0.05 - 40.00 Hz Modulation speed 0 - 100% Modulation depth LR, L->R, L
Effects Parameters
197
AW1600
Owner’s Manual
Appendix
■
REV->PAN
■
DELAY+ER.
Parameter
Range
Description
REV TIME
0.3 – 99.9 s
Reverb time
INI.DLY
0.0 – 500.0 ms
Initial delay before reverb begins
HI.RATIO
0.1 – 1.0
High-frequency reverb time ratio
DIFF.
0 – 10
Reverb diffusion (left-right reverb spreed)
DENSITY
0 – 100%
Reverb density
HPF
Thru, 21.2 Hz – 8.0 kHz
High-pass filter cutoff frequency
LPF
50 Hz – 16.0 kHz, Thru
Low-pass filter cutoff frequency
FREQ.
0.05 – 40.00 Hz
Modulation speed
DEPTH
0 – 100%
Modulation depth
DIR.
L<->R, L—>R, L<—R, Turn L,
Turn R
Panning direction
WAVE
Sine, Tri, Square
Modulation waveform
REV BAL.
0 – 100%
Reverb and panned reverb balance (0% = panned reverb, 100% = reverb)
MIX BAL.
0 – 100 [%]
Mix balance of the effects and dry sounds
Parameter
Range
Description
DELAY L
0.0 – 1000.0 ms
Left channel delay time
DELAY R
0.0 – 1000.0 ms
Right channel delay time
FB.DLY
0.0 – 1000.0 ms
Feedback delay time
FB.GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
HI.RATIO
0.1 – 1.0
High-frequency feedback ratio
TYPE
S-Hall, L-Hall, Random,
Revers, Plate, Spring
Type of early reflection simulation
ROOMSIZE
0.1 – 20.0
Reflection spacing
LIVENESS
0 – 10
Early reflections decay characteristics (0 = dead, 10 = live)
INI.DLY
0.0 – 500.0 ms
Initial delay before reverb begins
DIFF.
0 – 10
Reverb diffusion (left-right reverb spreed)
DENSITY
0 – 100%
Reverb density
ER NUM.
1 – 19
Number of early reflections
HPF
Thru, 21.2 Hz – 8.0 kHz
High-pass filter cutoff frequency
LPF
50 Hz – 16.0 kHz, Thru
Low-pass filter cutoff frequency
DLY/ER
0 – 100%
Delay and early reflections balance (0% = early reflections, 100% = delay)
MIX BAL.
0 – 100 [%]
Mix balance of the effects and dry sounds