Yamaha AW1600 Owner's Manual - Page 163
Using the MIDI Remote function, presets
View all Yamaha AW1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Using the MIDI Remote function Using the MIDI Remote function About the MIDI Remote function The AW1600 provides a MIDI Remote function that lets you use the controls of the top panel to transmit the desired MIDI messages. By using the MIDI Remote function, you can use the AW1600 as a physical controller for a computer program or MIDI tone generator. MIDI messages can be assigned to the following controls. ● Mixer section • Faders 1-8, 9/10-15/16 • [TRACK SEL] keys 1-8, 9/10-15/16 ● Transport section • RTZ [ ] key • FF [ ] key • PLAY [ ] key • REW [ ] key • STOP [■] key • REC [●] key Of these, the MIDI messages assigned to the faders and [TRACK SEL] keys can be freely reassigned. You can assign the following types of message. Control change number 64 (value= 127) Control change number 64 (value= 0) transmit transmit Alternatively, you can specify that a MIDI message with a fixed value is transmitted only when you press the [TRACK SEL] key to turn it on (lit). For example if you assign program change #1, the program change of that number will be transmitted each time you turn on the [TRACK SEL] key. Program change number 1 transmit Program change number 1 transmit ■ Messages that can be assigned to faders A MIDI message whose value changes in a range of 0-127 can be assigned to each fader. For example if you assign control change #7 (volume) to a fader, you can move the fader to control the volume of a MIDI tone generator. Control change number 7 transmit Value = 127 Value =0 ■ Messages that can be assigned to the [TRACK SEL] keys A MIDI message whose value changes between the two states of 0 or 127 can be assigned to each [TRACK SEL] key. For example if you assign control change #64 (hold) to a [TRACK SEL] key and specify that the control change value alternates between 0 and 127, pressing the [TRACK SEL] key to turn it on (lit) will transmit control change #64 with a value of 127 (Hold on), and turning it off (dark) will transmit control change #64 with a value of 0 (Hold off). Using the MIDI Remote function presets The PRESET page of the REMOTE screen provides ten different MIDI Remote presets. These presets have been created with specific devices and computer sequencer programs in mind, and assign the necessary messages to the AW1600's faders and [TRACK SEL] keys. You can use the MIDI Remote function immediately, just by selecting a preset in this page and connecting the appropriate external MIDI device. Sequencer programs that are supported ● Windows • Cubase SX 3.0.1 • Logic Platinum 5.5.1 (*1) • Nuendo 3.0.1 • Sonar 4.0.1 Producer Edition ● Macintosh • Cubase SX 3.0.1 • Logic Pro 7.0.1 (*1) • Nuendo 3.0.1 • Protools TDM 6.7 (*2) 14 MIDI and utility functions *1 Use the setting file from the included CD-ROM to map the AW1600's faders/[TRACK SEL] keys/transport keys to the Logic key commands. Track assignments must be made within Logic as appropriate for your system. *2 Select the CS-10 settings as the MIDI controller type. For details on the CS-10 settings, ask Digidesign. AW1600 Owner's Manual 163