Yamaha EAD10 EAD10 Reference Manual - Page 18

Scene Edit Inst Voice MENU Scene Edit MessageType : Select MIDI Message Type Sets the type of MIDI message to be sent when the pad is struck. NOTE Any setting other than note does not produce a sound when the pad is struck. note [For note] Sends a MIDI note. Use this parameter to set the pad to produce a sound when struck. Note : MIDI Note Output Sets the MIDI note that is sent by the Trigger Input Source. Set the MIDI note number to be sent whenever a Trigger signal is received from the specified Trigger Input Source. Settings are displayed as "Note number / Note name." MIDI Ch : MIDI Channel Set which MIDI channel to use for sending out the MIDI message to play the Trigger Input Source. GateTime : Gate Time Sets the gate time (the time that passes between the output of MIDI Key On and Key Off messages) for the Trigger Input for each Trigger Input Source. TrgVel : Trigger Velocity Sets the velocity value of the MIDI signal that is sent whenever a Trigger Input is received from a Trigger Input Source. variable 1 to 127 The velocity value reflects the strength with which the pad is struck. MIDI notes are sent with Velocity at the fixed value, regardless of how hard or soft the pad is struck. REVERB [For REVERB] Controls the amount of Reverb (knob) according to how the pedal depressed or how hard the pad is struck. No sound is produced even when the pad is struck. MinValue : Minimum Value Sets the amount (minimum) of Reverb applied when the pedal is released or when the pad is struck lightly. MaxValue : Maximum Value Sets the amount (maximum) of Reverb applied when the pedal is depressed fully or when the pad is struck hard. Effect Volume Tempo EAD10 Reference Manual (Advanced) 18