Yamaha EAD10 EAD10 Reference Manual - Page 25

Trigger Input Mode Curve Pad Type Trigger Trigger This section explains the "Trigger" settings in the menu. Depending on the pad you have connected, different Trigger signals are generated when you strike the pad during the performance. The "Trigger" settings allow you to optimize Trigger signals for each pad for processing by the Main Unit. The settings are saved when the power is turned off. Select the appropriate pad type when you connect the pad. When you connect the pad to the [qKICK/w] jack and [eSNARE/r] jack, make sure to switch the Input Mode. Settings Screen Structure Trigger Input Mode Curve Pad Type Crosstalk FootSwSelect Input Mode Settings Curve Settings Pad Type Settings Crosstalk Prevention Settings Foot Switch Select Settings Input Mode Trigger/Input Mode Input Mode Settings Settings Screen Structure Trigger Input Mode Trg1/Trg2 Trg3/Trg4 Trigger 1/Trigger 2 Input Mode Trigger 3/Trigger 4 Input Mode Sets how to use the mono × 2 input jack. Select "paired" when using a drum trigger (DT50S) or similar device. Trg1/ Trg2: Trigger 1/ Trigger 2 Input Mode Sets the [qKICK/w] jack to use the qKICK and w Trigger Inputs as a set or used separately. Trg3/ Trg4: Trigger 3/ Trigger 4 Input Mode Sets whether the [eSNARE/r] jack eSNARE and r Trigger Inputs will be used as a set or used separately. Settings paired, separate Crosstalk FootSwSelect EAD10 Reference Manual (Advanced) 25