Yamaha EAD10 EAD10 Reference Manual - Page 31

Trigger Input Mode Curve Pad Type MENU Trigger Crosstalk Trigger/Crosstalk Crosstalk Prevention Settings Settings Screen Structure Trigger Crosstalk All Reject Lvl Reject Lvl All Rejection Level Rejection Level (Source Pad) The term "crosstalk" refers to the output of trigger signals from an electronic drum pad (including an acoustic drum with a drum trigger attached) other than the one that was struck as a result of vibrations or interference between pads. Crosstalk is prevented by suppressing any Trigger Signal sound that is lower than the specified value. All Reject Lvl : All Rejection Level Resolves crosstalk between the pad that is displayed at the upper right of the screen and all other pads. While higher values are better at preventing crosstalk, they can also make it difficult to play other sounds at the same time. Settings Level: 0 to 99 Reject Lvl : Rejection Level (Source Pad) Resolves crosstalk between the pad that is displayed at the upper right of the screen and other individual pads. For example, in a case where Trg2 mistakenly produces a sound when hitting Trg1, set Trg2 to be displayed in the upper right of the screen, place a check mark on Trg1, then raise the Reject Lvl. While higher values are better at preventing crosstalk, they can also make it difficult to play other sounds at the same time. Settings Level: 0 to 99 Source Pad: Trg 1, Trg 2, Trg 3, Trg 4, Trg 5, Trg 6 NOTE When the Input Mode is set to "paired," Trg2 and Trg4 will not be set as the rejection source even when both are checked. FootSwSelect Trigger/FootSwSelect Foot Switch Select Settings Settings Screen Structure Trigger FootSwSelect FootSwSelect Select Foot Switch FootSwSelect Crosstalk FootSwSelect : Select Foot Switch Choose from HH65 (hi-hat controller), FC3 (foot pedal), FC4/5 (foot pedal or foot switch), or FC7 (foot controller) for the controller connected to the [FOOT SW] jack. Settings HH65, FC3, FC4/5, FC7 EAD10 Reference Manual (Advanced) 31