Yamaha MO8 Owner's Manual - Page 160
F3] FILTER, SF1] TYPE, SF2] VEL SENS, Velocity Sensitivity, Basically
UPC - 641018006938
View all Yamaha MO8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Voice mode Voice Edit mode Normal Voice Edit Element Edit EGTimeSens (EG Time Sensitivity) Determines the degree to which the notes (specifically, their position or octave range) affect the Pitch EG times of the selected Element. The Center Key (next parameter) is used as the basic pitch for this parameter. A positive setting will cause the amplitude of lower notes to change slower and that of higher notes to change faster. conversely, negative values will cause it to fall. Settings: -64 - 0 - +63 FCenterKey Determines the central note or pitch for the Key Follow effect on Pitch EG. When the Center Key note is played, the PEG behaves according to its actual settings. The pitch change characteristics for other notes will vary in proportion to the EG Time settings. Settings: C -2 - G8 n You can also set the Center Key directly from the keyboard, by holding down the [INFORMATION] button and pressing the desired key. Pitch Sensitivity and Center Key EG Time Sensitivity and Center Key When Pitch Sensitivity is set to 100 Large Amount of pitch change + Small - Positive value Negative value Lower range Faster speed +63 +30 Higher range -40 Slower speed Lower range Center key Higher range Center key [F3] FILTER [SF1] TYPE From this display you can make comprehensive settings for the Filter unit. The available parameters differ depending on which Filter type is selected here. Type Basically, there are four different Filter types: an LPF (Low Pass Filter), an HPF (High Pass Filter), a BPF (Band Pass Filter) and a BEF (Band Elimination Filter). Each type has a different frequency response and produces a different effect on the sound. This synthesizer also features special combination Filter types, for additional sonic control. Settings: Refer to page 170. Gain Determines the Gain (the amount of boost applied to the signal sent to the Filter). Settings: 0 - 255 Cutoff Determines the cutoff frequency for the Filter. or the central frequency around which the Filter is applied. Settings: 0 - 255 Resonance/Width This parameter's function varies according to the selected Filter Type. If the selected filter is an LPF, HPF, BPF (excluding the BPFw), or BEF, this parameter is used to set the Resonance. For the BPFw, it is used to adjust the Width of the band. Resonance is used to set the amount of Resonance (harmonic emphasis) applied to the signal at the cutoff frequency. This can be used in combination with the cutoff frequency parameter to add further character to the sound. The Width parameter is used to adjust the width of the band of signal frequencies passed by the filter with the BPFw. Settings: 0 - 127 Distance Determines the distance between the Cutoff frequencies, for the Dual Filter types (which feature two identical filters combined in parallel, and the LPF12 + BPF6 type). Settings: 0 - 255 HPFCutoff Determines the central frequency for the Key Follow parameter (below) of the HPF. When a filter type "LPF12" or "LPF6" is selected, this parameter is available. Settings: 0 - 255 HPFKeyFlw (Key Follow) Determines the Key Follow setting for the HPF Cutoff frequency. This parameter varies the center frequency according to the position of the notes played on the keyboard. A positive setting will raise the center frequency for higher notes and lower it for lower notes. A negative setting will have the opposite effect. This parameter is available only when the filter type "LPF12" or "LPF6" is selected. Settings: -200 ~ 0 ~ +200 [SF2] VEL SENS (Velocity Sensitivity) From this display you can determine how the Filter and the FEG respond to velocity. EGTime, Segment Determines the velocity sensitivity of the FEG's Time parameters. Select the Segment first, then set its Time parameter. Positive Time settings will play back the specified Segment faster in proportion to the played velocity and negative values will play it back slower. Settings: EG Time: -64 - 0 - +63 Settings: Segment: atk, atk+dcy, dcy, atk+rls, all atk (attack EG Time Value affects Attack time. atk+dcy (attack + decay) ......EG Time Value affects Attack/Decay1 time. dcy (decay EG Time Value affects Decay time. atk+rls (attack + release).......EG Time Value affects Attack/Release time. all EG Time Value affects all FEG Time parameters. Performance mode Song mode Pattern mode Mixing Voice mode Reference Utility mode File mode Master mode 160 Owner's Manual