Yamaha PSR-5700 Owner's Manual (feature Reference) - Page 35

[F2] Reverb, Effect The PSR-5700 has 23 reverb-based effects and 9 other effects that can be selected via the four pages accessed by this function. The selected reverb and effect types are applied to the sound when the [EFFECT] and [REVERB] buttons are used (see page 37 in the Getting Started manual). 1 REVERB TYPE `REVERB TYPE No. 1 Type=Reverb : Hall - + - + Purpose: Selects the reverb effect to be applied when the [REVERB] button is turned on (see page 37 of the "Getting Started" manual). Procedure: The right [-] and [+] buttons step through the reverb list effect by effect. For faster selection you can use the left [-] and [+] buttons to directly select the reverb categories - Reverb, Delay, etc. - and then use the right [-] and [+] buttons to select the desired reverb effect within that category. The Reverb Effects are: 1. Reverb : Hall 2. Reverb : Room 3. Reverb : Plate 4. Reverb : Church 5. Reverb : Club 6. Reverb : Stage 7. Reverb : Bathroom 8. Reverb : Metal 9. Delay : Short 10. Delay : Medium 11. Delay : Long 12. Delay : OneShot 13. TempoSync : Short 14. TempoSync : Long 15. Echo : Stereo 16. Echo : PingPong 17. Refl&Gate : Panned 18. Refl&Gate : Early 19. Refl&Gate : Gate 20. Delay&Rev : Single 21. Delay&Rev : DelayL/R 22. Variation : Distort. 23. Variation : Tunnel Notes: The "TempoSync" effects produce a delay that is synchronized to the currently selected tempo. "Variation : Distort" produces a distortion effect. Try out all of the effects to get a feel for what they can do to your sound. 2 REVERB DEPTH "REVERB DEPTH R' B˜ C2' C1' O2¶ O1~_ - + - + Purpose: Independently sets the depth of the selected reverb effect for the rhythm, bass, chord 1, chord 2, orchestra 1, and orchestra 2 sound. Procedure: Use the [] buttons to select the parameter for which reverb depth is to be adjusted (R = rhythm; B = bass; C1 = chord 1; C2 = chord 2; O1 = orchestra 1; O2 = orchestra 2), and use the [-] and [+] buttons to set the reverb depth for each parameter. Pressing the [-] and [+] buttons simultaneously instantly recalls the default depth value. Notes: Reverb depth can be adjusted in 7 steps, represented by a vertical bar to the right of each parameter. The longer the bar, the greater the reverb depth. 35