Yamaha PSR-S950 Owner's Manual - Page 68
AUDIO PLAYER display., PLAY/PAUSE button
View all Yamaha PSR-S950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2 Set the desired Voice, etc. which you want to use for your performance. 3 Press the [USB AUDIO PLAYER] button to call up the USB AUDIO PLAYER display. 4 Press the [1 ] (REC) button to enter recording standby. The [PLAY/PAUSE] button flashes. Recordable time NOTE The USB flash memory of "USB1" is selected as the recording destination when multiple USB flash memories are connected. 5 Start recording by pressing the [3 ] (PLAY/PAUSE) button, then start your performance. The elapsed recording time is shown in the display while recording. Elapsed recording time NOTICE Never attempt to disconnect the USB flash memory or turn the power off during recording. Doing so may corrupt the USB flash memory data or the recording data. 6 Stop recording by pressing the [2 ] (STOP) button. Recorded data is automatically saved to the USB flash memory as a file with the name automatically set. 7 Press the [3 ] (PLAY/PAUSE) button to play back the recorded performance. To see the file of the recorded performance in the File Selection display, press the [H] (FILE) button. NOTE The recording operation continues, even if you close the USB AUDIO PLAYER display by pushing the [EXIT] button. Press the [USB AUDIO PLAYER] button to call up the USB AUDIO PLAYER display again, then stop the recording by pressing the [2 ] (STOP) button. NOTE Even if you make a mistake in your performance, you cannot overwrite an existing file. Delete the recorded file on the File Selection display, then record your performance again. 68 PSR-S950/S750 Owner's Manual