Yamaha TSR-5830 TSR-5830 Owner s Manual - Page 100
MAC Address Filter, DMC Control, Network Standby
View all Yamaha TSR-5830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
n MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. Note Operation of the AirPlay function (p.62) or the DMC is not limited by this setting. Filter Enables/disables the MAC address filter. Settings Off Disables the MAC address filter. Enables the MAC address filter. In "MAC Address 1-10", specify the On MAC addresses of the network devices that will be permitted access to the unit. MAC Address 1-10 Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when "Filter" is set to "On". n Procedure 1 Use the cursor keys (q/w) to select an MAC address number (1 to 10). 2 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. 3 To exit from the menu, press SETUP. n DMC Control Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback. Settings Disable Enable Does not allow DMCs to control playback. Allows DMCs to control playback. Note A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network. n Network Standby Selects whether the unit can be turned on from other network devices (network standby). Settings Off On Auto Disables the network standby function. Enables the network standby function. (The unit consumes more power than when "Off" is selected.) Enables the network standby function. (If "Network Connection" is set to "Wired", the unit is set to the power saving mode when the network cable is disconnected.) With an advanced energy saving design, this product achieves a low power consumption of not more than two watts when in Network Standby mode. 100 En