Yamaha TSR-5830 TSR-5830 Owner s Manual - Page 21
Setting the speaker impedance
View all Yamaha TSR-5830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
n Notes on installation of ceiling speakers When installing presence speakers to a ceiling, install them just above the listening position, or the ceiling between the extensions of the front speakers and listening position. Setting the speaker impedance (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to "6 Ω MIN". 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press z (power). z (power) Notice ▪ Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified contractor or dealer personnel for installation works. STRAIGHT 3 Check that "SP IMP." is displayed on the front display. LINK MASTER OUT 2 ECO SP STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi-Res ENHANCER YPAO VOL. A- DRC IMP.••8¬MIN VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR 4 Press STRAIGHT to select "6 Ω MIN". 5 Press z (power) to set the unit to standby mode and remove the power cable from the AC wall outlet. You are now ready to connect the speakers. 21 En