Yamaha TSR-5830 TSR-5830 Owner s Manual - Page 33
Configuring the necessary speaker settings
![]() |
View all Yamaha TSR-5830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
8 Configuring the necessary speaker settings If you use any of the following speaker configurations, follow the procedure below to configure the corresponding speaker settings manually before performing YPAO. • Using surround back speakers (p.17), bi-amp connection (p.72) or Zone B speakers (p.73) • Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT) (p.18) • Using the presence speakers for Dolby Atmos or DTS:X playback (p.20) 1 Press z (receiver power) to turn on the unit. 2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note If you turn on the unit for the first time, the message regarding the network setup appears. For now, press RETURN and proceed to Step 3. 3 Press SETUP. 4 Use the Cursor keys to select "Speaker" and press ENTER. 5 Use the Cursor keys to select "Configuration" and press ENTER. 6 Configure the corresponding speaker settings. ▪ When using surround back speakers, bi-amp connections or Zone B speakers, select "Power Amp Assign" (p.85), then select your speaker system. ▪ When using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT), select "Virtual CINEMA FRONT" (p.88), then select "On". ▪ When using the presence speakers for Dolby Atmos or DTS:X playback, select "Layout" (p.87), then select your presence speaker layout. 7 To exit from the menu, press SETUP. 33 En
![](/manual_guide/products/yamaha-tsr5830-tsr5830-owner-s-manual-f2eed72/33.png)