Yamaha Tyros2 Owner's Manual - Page 131

Reference Song Creator (Digital Recording) Example 3 NOTE • Since the music score displayed on the instrument is generated from the recorded MIDI data, it may not appear exactly the same as shown here. To properly enter the tied notes here, keep in mind that you'll need to hold the keys down during the entire operation until all the notes are entered. 1 Set the parameters below in sequence. Determines the velocity (loudness) of the note to be entered. Here, we'll select "ff," as specified in the example. Sets the Gate Time, or the length of the note (as a percentage). Here, we'll select "Normal," as specified in the example. Use these buttons to set the resolution of the next note. Here, we'll set the resolution to an 1/8 note, as specified in the example. 2 Enter the note C3, as specified in the example. Do not release C3 yet. Keep holding the note as you execute the following steps. While holding the key C3, press the 1/8 note LCD button. 3 Enter the note E3. Do not release C3 and E3 yet. Keep holding the notes as you execute the following steps. While holding the keys C3 and E3, press the 1/8 note LCD button. 4 Enter the note G3. Do not release C3, E3 and G3 yet. Keep holding the notes as you execute the following steps. While holding the keys C3, E3 and G3, press the 1/8 note LCD button. 131 Tyros2 Owner's Manual