Yamaha Tyros2 Owner's Manual - Page 179

Mixing Console Reference There are many components that make up the overall sound of the Tyros2. These include MIDI sequence data from the songs, styles, and Multi Pads, and audio input from a microphone, as well as the various parts of your keyboard performance. The Mixing Console gives you control over the volume and pan settings of each of these components- and some other settings as well-letting you fine-tune the overall sound of the Tyros2. Parts making up the Tyros2 sound ● Keyboard parts Consists of RIGHT 1, RIGHT 2, RIGHT 3, LEFT. ● Multi Pad parts Consists of Multi Pads 1, 2, 3, and 4 ● Microphone sound part Split Point (page 158) ● Song parts Consists of 1-16 channels. ● Style parts Consists of Rhythm 1, 2, Bass, Chord1, 2, Pad, Phrase 1, 2 Basic Procedure (Mixing Console) 1 Press the [MIXING CONSOLE] button to call up the Mixing Console display. Quick Guide on pages 36, 37, and 46 4 2 Use the [TAB] buttons to call up the desired page. Part Settings (page 180) Part Settings (page 180), Effects (page 181) Part Settings (page 180), Equalizer (page 184) Master Compressor (page 185) Line Out Settings (page 185) 3 Press the [MIXING CONSOLE] button several times until the desired parts are displayed. Pressing the [MIXING CONSOLE] button alternates among the displays as listed below. All parts 4 Select the row at which the desired parameters are located by pressing the corresponding LCD button. Style channels Song channels 1-8 Song channels 9-16 The available displays above may differ depending on the page you selected in step #2. 5 Set each parameter. 6 If necessary, store the settings from the Mixing Console display. Basic instructions on saving the settings are given below, and brief explanations of the parameters are on the next page. For details on the parameters, refer to the separate Data List booklet. • The settings of the keyboard parts, Style part, Maulti Pad part, and Microphone sound part can be memorized to the Registration Memory (page 52). • The settings of the Song part can be saved as a song to the User drive or external devices. After setting, call up the CHANNEL display of the Song Creator, press the [EXECUTE] LCD button on this display to reflect the settings to the song data on RAM, then save the song to the User drive or external devices (page 56). 179 Tyros2 Owner's Manual