Yamaha Tyros2 Owner's Manual - Page 222

Appendix Installing an Optional Hard Disk 5 Attach the hard disk unit to the hard disk cover using the included four screws. You should tighten these two screws first. Make sure the bottom of the hard disk is facing up. Depending on the type of hard disk drive you plan to install, select holes (A) or holes (B) to attach the hard disk drive. * Holes (A) are used in this illustration. 6 Replace the hard disk drive and cover (included with the hard disk) by fitting it into the Tyros2 as shown in the illustration. These four pins are unused. Make sure not to bend the pins. 7 Attach the hard disk cover with the screw removed in step #4. 8 Replace the cover and attach it with the four screws removed in step #3. 9 Check that the installed hard disk is functioning properly. If the HD drive tab appears on the Open/Save display, the hard disk is OK. If the drive has multiple partitions, these will be shown as different HD drive tabs in the display. NOTE • If you have installed the hard disk that was once used for the PSR-9000/ 9000Pro/Tyros and turn the Tyros2's power on, you can immediately view the files on the hard disk and use the song files from the PSR-9000/ 9000Pro/Tyros. However, to properly use the style, Multi Pad, and Registration Memory files from the PSR-9000/ 9000Pro/Tyros, you will need to convert the data using a computer and the File Converter software (available for free download on the Tyros2 website). 222 Tyros2 Owner's Manual