Yamaha Tyros2 Owner's Manual - Page 219

Appendix Installing the Optional Speakers Make sure that you have all of the parts below, included in the TRS-MS02 speaker package. Satellite speakers (2) Subwoofer speaker (1) Speaker brackets (2) RCA pin cables (2) RCA pin/8-pin combination cable (1) 1 Turn the Tyros2's power off, and disconnect the AC power cord. Also, make sure to disconnect the keyboard from any other external devices. 2 Insert the two speaker brackets to the rear panel of the Tyros2. Use the outside slots (as shown). NOTE • Either bracket can be fastened to either location. 3 Fasten the satellite speakers to the left and right brackets. Place the speaker on the bracket. Adjust the direction of the speaker as desired, then fasten it securely to the bracket. NOTE • Either speaker can be placed on either bracket. • If you want to change the direction of the satellite speaker, unfasten it from the bracket by rotating the lever, then adjust the speaker position as desired, and fasten it to the bracket again. 4 Use the RCA pin cables to connect the speakers to the respective outputs on the Tyros2. NOTE • Either cable can be used for either location. 219 Tyros2 Owner's Manual