Yamaha Tyros2 Owner's Manual - Page 194

Reference Making Global and Other Important Settings-Function ■ MEDIA ...From the [FUNCTION] → UTILITY → MEDIA display, you can set or execute important media-related operations (below) for the Tyros2. The word "media" includes the optional USB storage device and optionally installed hard disk drive. Checking remaining memory on the media (see below). Formatting a media (see below) IMPORTANT • If you use the floppy disk, make sure to read the section "Handling the floppy disk drive (FDD) and floppy disks" on page 231. Turns the Song Auto Open function on or off. When this is set to "ON," the Tyros2 automatically calls up the first song in the media that is inserted to the drive. NOTE • When you select a song on a CD-ROM drive to be auto-opened, the song may not be called up automatically if the CD-ROM drive takes a lot of time to be recognized. The optionally installed hard disk unit will go into a "sleep" mode after a specified time of inactivity, both to maximize the lifetime of the hard disk and to minimize unnecessary mechanical noise. This parameter determines the sleep time. NOTE • When using the Hard Disk Recorder function, always set this to "NEVER." If you set this to something other than "NEVER," the Hard Disk Recorder may not operate correctly. NOTE • Commercially available music data is subject to protection by copyright laws. Copying commercially available data is strictly prohibited, except for your own personal use. Some music software is purposely copy-protected and cannot be copied. ● Checking remaining memory on the media (PROPERTY) You can check the amount of remaining memory on the media. 1 Use the [A]/[B] button to select the desired media. 2 Press the [PROPERTY] LCD button ([F] button) to check the memory size. ● Formatting a media (FORMAT) Setting up media for use with the Tyros2 is refered to as "formatting." This function is also useful for quickly deleting unnecessary files from an already formatted media. Be careful when using this operation, since it automatically deletes all data on the media. 1 Use the [A]/[B] button to select the desired media. 2 Press the [FORMAT] LCD button ([H] button) to format the media. CAUTION • Formatting a media completely erases all data on the media. Make sure that the media you're formatting does not contain important data! NOTE • The Tyros2 is capable of formatting an installed hard disk having a cluster size of less than 32 Kbyte, creating a single partition only; multiple partitions cannot be created. However, if the installed hard disk has been pre-formatted into several partitions on another instrument such as the PSR-9000 or 9000Pro, the Tyros2 can access up to four partitions of the hard disk. 194 Tyros2 Owner's Manual