Yamaha Tyros2 Owner's Manual - Page 149

Reference Recording Audio with the Hard Disk Recorder Playing a Playlist Once you've created and/or edited a Playlist (page 147) and you've enabled the Playlist mode, you can play back the files in the list-at any time during your performance. Keep in mind that playback of files is not instantaneous. Since the Hard Disk Recorder needs to load each file before playin it, playback pauses roughly one or two seconds between files. 1 Press the Hard Disk Recorder [SELECT] button to call up the AUDIO display. 2 Press the [PLAYLIST] LCD button (upper [6] button). NOTE • The [SELECT] button toggles between the Audio and Playlist displays within the Hard Disk Recorder function. 3 Use the [SELECT] LCD buttons ([7] buttons) to select a file for play- back. After a couple of seconds, the selected file is highlighted in green. To have the files playback from the beginning of the Playlist, select the first file. A check mark indicates the file is enabled for playback, a minus sign ( - ) indicates the file will be skipped, and an exclamation mark indicates the file does not contain data. The Playlist mode will be active when you select a file in the Playlist. Note that the indicator at the top left of the display now shows "Playlist." While the Playlist mode is active, the HARD DISK RECORDER [PREV]/[NEXT] buttons function as Previous/Next controls for the Playlist. Pressing the appropriate button calls up a pop-up window and selects the previous or next audio file in the Playlist. You can then use the [PLAY/PAUSE] button to start playback of the Playlist from the selected file. NOTE • To select a file, you can also use the [DATA ENTRY] dial to move the cursor and press the [ENTER] button to actually select the song. 149 Tyros2 Owner's Manual