Yamaha Tyros2 Owner's Manual - Page 64

Connecting to a USB Storage Device

Page 64 highlights

Quick Guide Connecting to a USB Storage Device By connecting the instrument to a USB storage device, you can save data you've created to the device, as well as read data from it. CAUTION • Avoid frequently turning the power on/off to the USB storage device, or connecting/disconnecting the cable too often. Doing so may result in the operation of the instrument "freezing" or hanging up. While the instrument is accessing data (such as in the Save, Copy and Delete operations and READ/WRITE lamp is on or flashing), do NOT unplug the USB cable, do NOT remove the media from the device, and do NOT turn the power off to either device. Doing so may corrupt the data on either or both devices. NOTE • You can also use the [USB TO DEVICE] terminal to connect a USB-type LAN adaptor to access special Internet websites (page 197). NOTE • Even with a computer connected to the [USB TO HOST] terminal and a USB storage device connected to the [USB TO DEVICE] terminal, you cannot access the USB storage device from the computer via the instrument. NOTE • Though the instrument supports the USB 1.1 standard, you can connect and use a USB 2.0 storage device with the instrument. However, note that the transfer speed is that of USB 1.1. NOTE • Do not connect/disconnect/access the USB storage device during Hard Disk Recorder playback. Doing so may result in incorrect song playback using the Hard Disk Recorder. ■ Compatible USB storage devices Up to two USB storage devices, such as a floppy disk drive, hard disk drive, CD-ROM drive, flash memory reader/writer, etc., can be connected to the [USB TO DEVICE] terminal. (If necessary, use a USB hub.) Other USB devices such as a computer keyboard or mouse cannot be used. The instrument does not necessarily support all commercially available USB storage devices. Yamaha cannot guarantee operation of USB storage devices that you purchase. Before purchasing a USB storage device, please consult your Yamaha dealer, or an authorized Yamaha distributor (see list at end of the Owner's Manual) for advice, or see the following web page: http://music.yamaha.com/tyros2 NOTE • If you are connecting two or three devices to a USB TO DEVICE terminal at the same time (such as two USB storage devices and a LAN adaptor), use a USB hub device. The USB hub must be selfpowered (with its own power source) and the power must be on. Only one USB hub can be used. If an error message appears while using the USB hub, disconnect the hub from the instrument, then turn on the power of the instrument and re-connect the USB hub. NOTE • Although CD-R/RW drives can be used to read data to the instrument, they cannot be used for saving data. 64 Tyros2 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

64
Quick Guide
Tyros2 Owner’s Manual
Connecting to a USB Storage Device
Compatible USB storage devices
Up to two USB storage devices, such as a floppy disk drive, hard disk drive, CD-ROM
drive, flash memory reader/writer, etc., can be connected to the [USB TO DEVICE] ter-
minal. (If necessary, use a USB hub.)
Other USB devices such as a computer keyboard or mouse cannot be used. The instrument
does not necessarily support all commercially available USB storage devices. Yamaha
cannot guarantee operation of USB storage devices that you purchase. Before purchasing
a USB storage device, please consult your Yamaha dealer, or an authorized Yamaha dis-
tributor (see list at end of the Owner’s Manual) for advice, or see the following web page:
By connecting the instrument
to a USB storage device, you
can save data you’ve created
to the device, as well as read
data from it.
Avoid frequently turning the power on/off to the USB storage device, or
connecting/disconnecting the cable too often. Doing so may result in
the operation of the instrument “freezing” or hanging up. While the
instrument is accessing data (such as in the Save, Copy and Delete
operations and READ/WRITE lamp is on or flashing), do NOT unplug the
USB cable, do NOT remove the media from the device, and do NOT turn
the power off to either device. Doing so may corrupt the data on either
or both devices.
CAUTION
You can also use the [USB TO DEVICE] terminal to connect a USB-type LAN
adaptor to access special Internet websites (page 197).
NOTE
Even with a computer connected to the [USB TO HOST] terminal and a USB
storage device connected to the [USB TO DEVICE] terminal, you cannot
access the USB storage device from the computer via the instrument.
NOTE
Though the instrument supports the USB 1.1 standard, you can connect and
use a USB 2.0 storage device with the instrument. However, note that the
transfer speed is that of USB 1.1.
NOTE
Do not connect/disconnect/access the USB storage device during Hard Disk
Recorder playback. Doing so may result in incorrect song playback using the
Hard Disk Recorder.
NOTE
If you are connecting two or three
devices to a USB TO DEVICE ter-
minal at the same time (such as
two USB storage devices and a
LAN adaptor), use a USB hub
device. The USB hub must be self-
powered (with its own power
source) and the power must be
on. Only one USB hub can be
used. If an error message appears
while using the USB hub, discon-
nect the hub from the instrument,
then turn on the power of the
instrument and re-connect the
USB hub.
NOTE
Although CD-R/RW drives can be
used to read data to the instru-
ment, they cannot be used for sav-
ing data.
NOTE