Yamaha Tyros2 Owner's Manual - Page 65

Quick Guide Connecting to a USB Storage Device Using USB Storage Devices 1 Connect the USB storage device to the [USB TO DEVICE] terminal. 2 After connecting, exit once from the selection display, then return to the display (or press the [TAB] buttons simultaneously from the selection display). This operation refreshes the display to indicated USB storage access. The USB tabs (USB 1, USB 2, etc.) are automatically called up, allowing you to save files and play back music data from the devices. NOTE • The tabs indicating the connected USB devices (USB 1, USB 2, etc.) may be displayed up to USB 17 for each device or partition. The numbers are not fixed and may change according to the order in which the devices are connected and disconnected. Checking remaining memory on the USB storage device You can check this in the display called up by the following operation: [FUNCTION] → [I] UTILITY → [TAB] MEDIA Select the device by using the [A]/[B] buttons in this display and press the [PROPERTY] LCD button ([F] button). ■ Protecting your data (write-protect) To prevent important data from being inadvertently erased, apply the write-protect provided with each storage device or media. If you are saving data to the USB storage device, make sure to disable write-protect. ■ Formatting USB storage media When a message appears prompting you to format the device/media, execute the Format operation (page 194). CAUTION • The format operation overwrites any previously existing data. Proceed with caution. 65 Tyros2 Owner's Manual