Yamaha Tyros2 Owner's Manual - Page 76
Naming Folders/Files, Select the desired folder or file to be named.
View all Yamaha Tyros2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Basic Operations-Organizing Your Data Folder/File Operations using the Open/Save Display Naming Folders/Files Folders and files on the installed drives can be freely renamed. You can also name files you've created. The instructions below apply when calling up the Name operation from the Open/Save display. For other cases, go directly to step #5 below. 1 Call up the page (path) of the Open/Save display, where the relevant folders/files are located. 2 Press the [NAME] LCD button (lower [1] button) at the bottom the LCD display. The pop-up window for the Name operation appears at the bottom of the display. To return to the original display, press the [CANCEL] LCD button. 3 Select the desired folder or file to be named. 4 Press the [OK] LCD button (lower [7] button). The pop-up window for entering the name appears at the bottom of the display. To return to the original display, press the [CANCEL] LCD button. 5 Input the name of the selected folder or file. Move the cursor to the desired position by using the [DATA ENTRY] dial. Press the [OK] LCD button (upper [8] button) to actually enter the new name and return to the original display. Select the desired upper row menu by using the upper LCD [1]-[8] buttons. Select the desired lower row menu by using the lower LCD [1]-[8] buttons. Press the appropriate button, corresponding to the character you wish to enter. Several different characters are assigned to each button, and Press the [CANCEL] LCD button (lower [8] button) to delete all of the characters on the line at once and return to the original display. the characters change each time you press the button. Deletes the character at the cursor. To actually enter the selected character, move the cursor or press another letter-input but- Call up the mark (symbol) list by pressing the lower [6] button. ton. Alternately, you can wait for a short time and the characters NOTE will be entered automatically. • The maximum number of characters that can Call up the ICON SELECT display by pressing the lower [1] button. This lets you change the icon at the left of the file name. be used in naming is 41. • To enter numbers without pressing the button repeatedly, press and hold down the appropri- Change the type of character by using the upper [1] button. ate button for a while. • CASE capital letters, numbers, marks • case lowercase letters, numbers, marks 6 Press the [OK] LCD button (upper [8] button) to actually enter the new name for the item and return to the original display. 76 Tyros2 Owner's Manual