Yamaha Tyros2 Owner's Manual - Page 67

Quick Guide Connecting to a Computer Initial Setup Instructions are given below in basic outline format. For details, refer to the separate Installation Guide. 1 Confirm the minimum system requirements of the software you wish to use. • For software on the included CD-ROM, refer to the separate Installation Guide. • For other software, refer to the relevant manual or documentation. 2 Connect the computer to the Tyros2 using a USB cable. 3 Start the computer and install the USB MIDI driver. • Refer to the separate Installation Guide. 4 Install the desired software to a computer. • To install Voice Editor from the included CD-ROM, refer to the separate Installation Guide. For details on the Voice Editor, see page 111. • To install other software, refer to the relevant manual or documentation. Accessing a hard disk drive via the USB Storage Mode When the USB Storage mode is selected, Wave files and song files can be transferred between the internal hard disk drive of the Tyros2 and the computer. In the "normal" mode the USB connection can be used for MIDI control. The USB interface does not directly handle audio signals. 1 Confirm that the hard disk drive is installed to the Tyros2 and turn the computer's power on. 2 Turn the Tyros2's power on while holding the [MUSIC FINDER] button. 3 Manage files/folders in the hard disk drive installed to the Tyros2 by using the computer. 4 Press the [EXIT] button to exit the USB storage mode and call up the Main display. NOTE • Windows versions prior to Windows98 SE are not compatible with this USB storage mode. NOTE Execute the following before turning the USB Storage mode on/ off. • Close all application programs. • If the USB Storage mode is off, make sure that data is not being transmitted from the Tyros2. • If the USB Storage mode is engaged, make sure that no file reading or writing operation is in progress. • If the USB Storage mode is engaged, safely remove the Tyros2 from the Windows taskbar or drag the Tyros2 icons from the Macintosh desktop to the trash after closing all Tyros2 windows. NOTE • You cannot operate the Tyros2 from the panel while the USB storage mode is engaged. Also, the Tyros2 cannot receive MIDI signals or execute some functions from the pedals while the mode is engaged. NOTE • Do not format the hard disk drive from a computer when accessing the drive via the USB storage mode. If you format the hard disk drive while accessing the USB storage mode, the drive may not be able to be used in the Hard Disk Recorder. CAUTION • Do not access the HDR ROOT folder containing the audio files that you have created with the Hard Disk Recorder function. If you access the folder or make changes to it (moving the folder or copying some files in the folder, etc.), your important data will be deleted or damaged. 67 Tyros2 Owner's Manual