Yamaha Tyros2 Owner's Manual - Page 16

Panel Controls and Terminals ■ Rear Panel & Connections IMPORTANT • Since the Tyros2 has no built-in speakers, you need to monitor its sound output via external audio equipment. Alternatively, you could use a pair of headphones. CAUTION • Make sure that the POWER switch is in the OFF (extended) position before making any connections. If you make connections while the POWER switch is on, you risk damaging external equipment such as the amp or speakers. For installing an optional set of speakers. See page 18. For installing the included music rest. See page 19. CAUTION Air vent • Do not place objects on the instrument's air vent, since this may prevent adequate ventilation of the internal components, and possibly result in the instrument overheating. You can connect the Tyros2 directly to a computer monitor for displaying the lyrics and chords of your song data on a large screen. This output terminal delivers higher resolution than the VIDEO OUT jack. See page 116. Mini D-Sub 15-pin One or two optional Yamaha FC4 or FC5 footswitches connected to one of these jacks can be used to control sustain, enable an effect on a Super Articulation voice, and control a range of other important functions. An optional Yamaha FC7 Foot Controller connected to one of these jacks can be used to control volume and a range of other important functions. See page 189. MFC10 The sophisticated MIDI functions give you powerful tools to expand your music performance and creation possibilities. See page 217. NOTE • If the display is not aligned properly in the monitor, change the settings on the monitor itself. RCA pin plug VIDEO IN IMPORTANT • The Tyros2's default setting for the external television/video monitor signal is "PAL" Depending on your particular locale, the standard may be different and the setting should be changed accordingly. (For example, NTSC is generally used in North America.) Check the standard used by your television or video monitor, and if it is not PAL, change the setting in the VIDEO OUT display to "NTSC" (page 188). 16 Tyros2 Owner's Manual You can connect the Tyros2 to a television or video monitor to display the lyrics and chords in your song data on a larger screen. See page 116. By connecting the instrument to a USB storage device, you can save data you've created to the device, as well as read data from it. You can also connect the USBtype LAN adaptor to directly access special Internet websites for this instrument. See page 64. Connecting to a computer via USB See page 66.