ZyXEL NBG-418N v2 User Guide - Page 57
QoS Rules, Source IP field, Up Ceiling, Delete, Reset, Tutorials, NBG-418N v2 User's Guide
View all ZyXEL NBG-418N v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 5 Tutorials 3 Then, Click Add in the QoS Rules section and several fields appears. Enter 192.168.1.10 in the Source IP field, 192.168.1.10/32 will appear in the field, the 32-bits network is IPv4 addresses block that is assigned by your ISP. Next, enter 150000 for Up Ceiling and 600000 for Down Ceiling and click Add. Note that the Up/Down Ceiling numbers should not exceed the Total Bandwidth. You have successfully set a specific minimum and maximum bandwidth for this particular IP address. 4 If you wish to delete a QoS Rules entry, click the Delete check box of the rule and click Delete button. To clear the Source IP, Up/Down Ceiling box fields, click the Reset button. NBG-418N v2 User's Guide 57
Chapter 5 Tutorials
NBG-418N v2 User’s Guide
57
3
Then, Click
Add
in the
QoS Rules
section and several fields appears. Enter 192.168.1.10 in the
Source IP field
, 192.168.1.10/32 will appear in the field, the 32-bits network is IPv4 addresses
block that is assigned by your ISP. Next, enter 150000 for
Up Ceiling
and 600000 for
Down
Ceiling
and click
Add
. Note that the Up/Down Ceiling numbers should not exceed the Total
Bandwidth. You have successfully set a specific minimum and maximum bandwidth for this
particular IP address.
4
If you wish to delete a QoS Rules entry, click the
Delete
check box of the rule and click
Delete
button. To clear the Source IP, Up/Down Ceiling box fields, click the
Reset
button.