ZyXEL NBG-418N v2 User Guide - Page 84
Table 33, LABEL, DESCRIPTION, Table 32
View all ZyXEL NBG-418N v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 7 WAN Table 32 Network > WAN > IPv6 (continued)(Static IPv6) LABEL DESCRIPTION Address Autoconfiguration Settings Enable Autoconfiguration Click Enable Autoconfiguration if you want the devices on your local area network to obtain network address that are not managed by a DHCPv6 server. Autoconfiguration Type Select SLAAC + Stateless DHCPv6 if you want the interface to automatically generate a link-local address via stateless autoconfiguration. Router Advertisement Lifetime Apply Reset Select Stateful(DHCPv6) when the devices connected to your LAN needs to have their TCP/IP configuration set to DHCPv6 or obtain an IPv6 address automatically. Type in the Router Advertisement Lifetime which is the amount of time in minutes that a device may have an IPv6 address before it is required to renew the lease. Click Apply to save your changes back to the NBG-418N v2. Click Reset to begin configuring this screen afresh. Figure 59 Network > WAN > IPv6 (SLAAC/DHCPv6) The following table describes the labels in this screen. Table 33 Network > WAN > IPv6 (SLAAC/DHCPv6) LABEL DESCRIPTION IPv6 Connection Type Select SLAAC/DHCPv6 when your NBG-418N v2 requests an IPv6 address from the ISP's server. IPv6 DNS Settings Obtain DNS server address automatically Click the Obtain DNS server address automatically radio button to get a DNS server address from your ISP's server. NBG-418N v2 User's Guide 84