ZyXEL Omni 56K USB Lite User Guide - Page 55
Extended AT# Command Sets, Fax Command Sets, Service Class 1 Commands
View all ZyXEL Omni 56K USB Lite manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Omni 56K USB Lite COMMAND *En OPTIONS *E0 * *E1 *Pn n=0 to 15 *P9 * *Qn *Q0 *Q1 *Q2 * *Q3 *T FUNCTION AND DESCRIPTION REF. Modem error control negotiation: S21.0 If error control negotiation fails, keep the non-error control connection. If error control negotiation fails, disconnect the call (hangup). Set transmission power level; ranges from -8 dBm to -15 S17.1-4 dBm (default: -11 dBm). Action taken when line quality changes: S27.6-7 No action to poor signal quality. Retrain action taken if signal quality is poor (see also S41.2). Adaptive rate, automatic fall-back or forward. Disconnect if signal quality is poor. Recall the last CND (Caller ID) information. S40.2 5.1.4 Extended AT# Command Sets Table 5-5 Extended AT# Command Sets COMMAND #En OPTIONS #E0 #E1 FUNCTION AND DESCRIPTION Modem status in escape state: Disable the report of modem status in escape state. Enable the report of modem status in escape state. REF. 5.2 Fax Command Sets 5.2.1 Service Class 1 Commands Command Sets 5-9