ZyXEL Omni 56K USB Lite User Guide - Page 61
Table 5-12 Extended S-Registers ATSn=x, COMMAND, FUNCTION AND DESCRIPTION
View all ZyXEL Omni 56K USB Lite manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Omni 56K USB Lite COMMAND S10= S11= FUNCTION AND DESCRIPTION Sets duration, in tenths of a second, modem waits after loss of carrier before hanging up. Sets duration and spacing, in milliseconds of dialed Touch-Tones. +REF. +007 +070 Table 5-12 Extended S-Registers "ATSn=x" COMMAND BIT S13= Bit 1 S14= bit 1 S15= bit 7-5 S16= S17= Bit 4-1 5 DEC dec 2 dec 0 2 dec 0 32 64 dec 0 1 8 dec 0-30 0 32 HEX FUNCTION AND DESCRIPTION hex Bit-mapped register. 2 Capture modem manufacturer information during V.42 handshake, can be displayed at ATI2 line if available ('Flash' or 'ZyXEL' stands for ZyXEL connection). hex Bit-mapped register: 0 Grant Remote Digital Loop-back test request. 2 Deny Remote Digital Loop-back test request. hex Bit-mapped register. 0 Profile 0 as active settings after power on. 20 Profile 1 as active settings after power on. 40 Factory default as active settings after power on. hex Test status register. 0 No test in progress. 1 Analog Loop-back test in progress. 8 Analog Loop-back with self-test in progress. hex Bit-mapped register. 0- Set transmit power level from 0 to -15 dBm. (See 1E also S35b3) (Default *P11) 0 Normal dial. (Default) 20 Reverse dial, go online in answer mode. REF. +000 +002 &T4 &T5* +066 Z0 Z1 Z2* +000 &T0 &T1 &T8 +022 *Pn D DR Command Sets 5-15