ZyXEL Omni 56K USB Lite User Guide - Page 67
Disable 'RINGING' result code., ATDSn initiates auto-dial of the stored numbers
View all ZyXEL Omni 56K USB Lite manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Omni 56K USB Lite COMMAND BIT S41= 6 7 S42= Bit 1 2 3 4 6 7 S43= Bit 6 7 S44= Bit 3 4 S45= DEC 64 128 dec 2 4 8 16 64 128 dec 64 128 dec 8 16 Dec 0255 HEX FUNCTION AND DESCRIPTION REF. 40 Force S0>=2; does not answer on the first ring. S0 80 Ignore calling tone, not to be used as fax detection. hex Bit-mapped register. +000 2 Enables throughput averaging. 4 CND message forces on even if ATQ2 is set. 8 Disables escape sequence code in answer mode. 10 Disable V.17 14,400 Fax in calling mode, no effect to answering mode. 40 Disable 'RINGING' result code. Xn 80 DCD forced on but pulse off for 0.5 second at &C0 carrier loss. hex Bit-mapped register. +008 40 Enable a 1.5 second pause between off-hook and modem answering. 80 Modem hang-up if the line condition does not permit modem to run at the highest speed set by '&Nn' command. hex Bit-mapped register. +000 8 ATDSn initiates auto-dial of the stored numbers DSn consecutively until connection is made (cyclic dial). 10 DSR follows DTR (see also S41.5). &S1 Hex Delay during which the CND silence detection is 0- disabled, in 20 ms units (see also S46). FF +100 Command Sets 5-21