ZyXEL P-660HW-D1 v2 User Guide - Page 193

Chapter 13 Bandwidth Management Click Advanced > Bandwidth MGMT > Rule Setup to open the following screen. Figure 110 Bandwidth Management: Rule Setup The following table describes the labels in this screen. Table 76 Bandwidth Management: Rule Setup LABEL DESCRIPTION Direction Select the direction of traffic to which you want to apply bandwidth management. Service Select a service for your rule or you can select User Defined to go to the screen where you can define your own. Priority Select a priority from the drop down list box. Choose High, Mid or Low. Bandwidth (kbps) Specify the maximum bandwidth allowed for the rule in kbps. The recommendation is a setting between 20 kbps and 20000 kbps for an individual rule. Add Click this button to add a rule to the following table. To LAN Interface # This is the number of an individual bandwidth management rule. Active This displays whether the rule is enabled. Select this check box to have the ZyXEL Device apply this bandwidth management rule. Enable a bandwidth management rule to give traffic that matches the rule priority over traffic that does not match the rule. Enabling a bandwidth management rule also allows you to control the maximum amounts of bandwidth that can be used by traffic that matches the rule. Rule Name This is the name of the rule. Destination Port This is the port number of the destination. 0 means any destination port. Priority This is the priority of this rule. Bandwidth (kbps) This is the maximum bandwidth allowed for the rule in kbps. Modify Click the Edit icon to go to the screen where you can edit the rule. Click the Remove icon to delete an existing rule. Apply Click Apply to save your changes to the ZyXEL Device. Cancel Click Cancel to begin configuring this screen afresh. P-660HW-Dx v2 User's Guide 193