ZyXEL P-660HW-D1 v2 User Guide - Page 269
Wall-mounting Instructions
View all ZyXEL P-660HW-D1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Appendix A Product Specifications and Wall Mounting Wall-mounting Instructions Complete the following steps to hang your ZyXEL Device on a wall. " See the Hardware Specifications table for the size of screws to use and how far apart to place them. 1 Select a high position on a sturdy wall that is free of obstructions. 2 Drill two holes for the screws. 3 Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 4 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 5 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL Device with the connection cables. 6 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the ZyXEL Device on the screws. Figure 154 Wall-mounting Example The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm). P-660HW-Dx v2 User's Guide 269