ZyXEL P-660HW-D1 v2 User Guide - Page 312
Appendix E Firewall Commands, P-660HW-Dx v2 User's Guide, Firewall Commands continued
View all ZyXEL P-660HW-D1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
Appendix E Firewall Commands Table 136 Firewall Commands (continued) FUNCTION COMMAND Edit E-mail config edit firewall e-mail mail-server DESCRIPTION This command sets the IP address to which the e-mail messages are sent. config edit firewall e-mail return-addr This command sets the source e-mail address of the firewall e-mails. config edit firewall e-mail email-to This command sets the e-mail address to which the firewall e-mails are sent. config edit firewall e-mail policy This command sets how frequently the firewall log is sent via e-mail. config edit firewall e-mail day This command sets the day on which the current firewall log is sent through e-mail if the ZyXEL Device is set to send it on a weekly basis. config edit firewall e-mail hour This command sets the hour when the firewall log is sent through e- mail if the ZyXEL Device is set to send it on an hourly, daily or weekly basis. config edit firewall e-mail minute This command sets the minute of the hour for the firewall log to be sent via e- mail if the ZyXEL Device is set to send it on a hourly, daily or weekly basis. Attack config edit firewall attack send-alert This command enables or disables the immediate sending of DOS attack notification e-mail messages. config edit firewall attack block Set this command to yes to block new traffic after the tcp-max-incomplete threshold is exceeded. Set it to no to delete the oldest half-open session when traffic exceeds the tcp-max-incomplete threshold. config edit firewall attack block-minute This command sets the number of minutes for new sessions to be blocked when the tcpmax-incomplete threshold is reached. This command is only valid when block is set to yes. 312 P-660HW-Dx v2 User's Guide