ZyXEL P-660HW-D1 v2 User Guide - Page 209
Supported MIBs, SNMP Traps, Configuring SNMP
View all ZyXEL P-660HW-D1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Chapter 15 Remote Management Configuration 15.7.1 Supported MIBs The ZyXEL Device supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of the MIBs is to let administrators collect statistical data and monitor status and performance. 15.7.2 SNMP Traps The ZyXEL Device will send traps to the SNMP manager when any one of the following events occurs: Table 85 SNMP Traps TRAP # TRAP NAME DESCRIPTION 0 coldStart (defined in RFC-1215) A trap is sent after booting (power on). 1 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot). 6 whyReboot (defined in ZYXEL- A trap is sent with the reason of restart before MIB) rebooting when the system is going to restart (warm start). 6a For intentional reboot: A trap is sent with the message "System reboot by user!" if reboot is done intentionally, (for example, download new files, CI command "sys reboot", etc.). 6b For fatal error: A trap is sent with the message of the fatal code if the system reboots because of fatal errors. 15.7.3 Configuring SNMP To change your ZyXEL Device's SNMP settings, click Advanced > Remote MGMT > SNMP. The screen appears as shown. Figure 120 Remote Management: SNMP P-660HW-Dx v2 User's Guide 209