ZyXEL P-660RU-T1 v3s User Guide - Page 145
Access Management > CWMP continued, Table 40
View all ZyXEL P-660RU-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Chapter 19 CWMP Table 40 Access Management > CWMP (continued) LINK DESCRIPTION Port The default port for access to the P-660RU-Tx from the management server is the HTTP port, port 80. If you change it, make sure it does not conflict with another port on your network and it is recommended to use a port number above 1024 (not a commonly used port). The management server should use this port to connect to the P-660RU-Tx. You may need to alter your NAT port forwarding rules if they were already configured. UserName The user name is used to authenticate the management server when connecting to the P-660RU-Tx. Type a user name of up to 255 printable characters found on an English-language keyboard. Spaces and characters such as are allowed. Password The password is used to authenticate the management server when connecting to the P-660RU-Tx. Type a password of up to 255 printable characters found on an English-language keyboard. Spaces are not allowed. Periodic Inform Select Activated to have the P-660RU-Tx periodically send information to the management server (recommended if CWMP is enabled) or select Deactivated to not have the P-660RU-Tx periodically send information to the management server Interval The interval is the duration in seconds for which the P-660RU-Tx must attempt to connect with the management server to send information and check for configuration updates. Enter a value between 1 and 86400 seconds. SAVE Click this to save your changes. CANCEL Click this to restore your previously saved settings. P-660RU-Tx User's Guide 145