ZyXEL P-660RU-T1 v3s User Guide - Page 65
Static IP Address, Interface Setup > Internet Static IP
View all ZyXEL P-660RU-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 7 Internet Setup 7.2.2 Static IP Address In the Interface Setup > Internet screen, select Static IP Address from the ISP field to display the following screen. Figure 23 Interface Setup > Internet (Static IP) The following table describes the labels in this screen. Table 13 Interface Setup > Internet (Static IP) LABEL DESCRIPTION Encapsulation Select the method of multiplexing used by your ISP from the dropdown list box. Available options are: 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP LLC(IPoA) and 1483 Routed IP VC-Mux. Static IP Address A static IP address is a fixed IP that your ISP gives you. Type your ISP assigned IP address in the field. IP Subnet Mask Enter a subnet mask in dotted decimal notation. Gateway Specify a gateway IP address (supplied by your ISP). Bridge Interface This field is only available when you select 1483 Bridged IP LLC or 1483 Bridged IP VC-Mux in the Encapsulation field. NAT Default Route Use this field to enable or disable the bridge mode. Activate the bridge mode when your ISP provides you with more than one IP address and you want the connected computers to get individual IP address from ISP's DHCP server directly. Use this field to enable or disable Network Address Translation (NAT). Select Yes to direct traffic not listed in the routing table to the default gateway. Select No to drop traffic not listed in the routing table. P-660RU-Tx User's Guide 65