ZyXEL P-660RU-T1 v3s User Guide - Page 77
The LAN Screen
View all ZyXEL P-660RU-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 8 LAN Setup 8.2 The LAN Screen Use this screen to configure your LAN settings. Click Interface Setup > LAN to display the following screen. Follow these steps to configure your LAN settings. 1 Enter an IP address into the IP Address field. The IP address must be in dotted decimal notation. This will become the IP address of your P-660RU-Tx. 2 Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed otherwise it is best to leave this alone, the configurator will automatically compute a subnet mask based upon the IP address you entered. 3 Click SAVE to save your settings. Figure 28 Interface Setup > LAN The following table describes the fields in this screen. Table 17 Interface Setup > LAN LABEL DESCRIPTION Router Local IP IP Address Enter the LAN IP address you want to assign to your P-660RU-Tx in dotted decimal notation, for example, 192.168.1.1 (factory default). IP Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your P-660RU-Tx automatically computes the subnet mask based on the IP Address you enter, so do not change this field unless you are instructed to do so. P-660RU-Tx User's Guide 77