ZyXEL P-660RU-T1 v3s User Guide - Page 164
P-660RU-Tx Access and Login
View all ZyXEL P-660RU-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Chapter 25 Troubleshooting 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Turn the P-660RU-Tx off and on. 5 If the problem continues, contact the vendor. 25.2 P-660RU-Tx Access and Login I forgot the IP address for the P-660RU-Tx. 1 The default IP address is 192.168.1.1. 2 If you changed the IP address and have forgotten it, you might get the IP address of the P-660RU-Tx by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the P-660RU-Tx (it depends on the network), so enter this IP address in your Internet browser. 3 If this does not work, you have to reset the device to its factory defaults. See Section 1.6 on page 29. I forgot the password. 1 The default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 1.6 on page 29. I cannot see or access the Login screen in the web configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.1. • If you changed the IP address (Section 8.2 on page 77), use the new IP address. 164 P-660RU-Tx User's Guide