ZyXEL P-660RU-T1 v3s User Guide - Page 96
Table 25, Advanced Setup > NAT > IP Address Mapping
View all ZyXEL P-660RU-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 10 Network Address Translation (NAT) Use this screen to change your P-660RU-Tx's address mapping settings. Click Advanced Setup > NAT > IP Address Mapping to open the following screen. Figure 38 Advanced Setup > NAT > IP Address Mapping The following table describes the fields in this screen. Table 25 Network > NAT > Address Mapping LABEL DESCRIPTION IP Address Mapping Address The rules configured in this screen apply to this PVC. Mapping Rule Rule Index Select the rule's index number from the drop-down list box. Rule Type Choose the port mapping type from one of the following. One-to-One: This mode maps one local IP address to one public IP address. Note that port numbers do not change for one-to-one NAT mapping type. Many-to-One: This mode maps multiple local IP addresses to one public IP address. This is equivalent to the Single IP feature that previous ZyXEL routers supported only. Many-to-Many Overload: This mode maps multiple local IP addresses to shared public IP addresses. Many-to-Many No Overload: This mode maps each local IP address to unique public IP addresses. Local Start IP Server: This type allows you to specify inside servers of different services behind the NAT to be accessible to the outside world. This is the starting local IP address. Local IP addresses are N/A for Server port mapping. 96 P-660RU-Tx User's Guide