Home » ZyXEL Manuals » Networking » ZyXEL PLA-407 » Manual Viewer

ZyXEL PLA-407 User Guide - Page 41

Firmware Screen, 5.5 Network Info Screen

Get ZyXEL PLA-407 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Chapter 5 The Configuration Utility 5.4 Firmware Screen Firmware is the software which is embedded in the PLA-407. This software contains processing instructions for how the PLA-407 sends and receives information in a secure way. You can check the ZyXEL website for firmware upgrades for your PLA-407. Note: To upgrade to the latest firmware, use the firmware upgrade tool available from the ZyXEL website (www.zyxel.com), or from the CD included with your PLA407. Make sure you also upgrade the PLA-4xx Series Configuration Utility if you do so, as older version utilities are not compatible with PLA-407s using the latest firmware. Click Firmware to open the screen as follows. Figure 17 Firmware Screen Be sure to upload the correct model firmware as uploading the wrong model firmware may damage your device. 5.5 Network Info Screen Use the Network Info screen to see the rates at which a specific PLA-407 is communicating with other Powerline adapters on your Powerline network. PLA-407 User's Guide 41

Section	Page
PLA-407	1
About This User's Guide	3
Document Conventions	6
Safety Warnings	8
Table of Contents	9
Introduction	13
Introducing the PLA-407	15
1.1 Overview	15
1.1.1 Data Transfer	16
1.1.2 Pass-Through Design	16
1.1.3 Noise Filter	16
1.1.4 Quality of Service	17
1.1.5 Low Power Mode	18
1.2 Expand Your Network with the PLA-407	18
1.3 Ways to Manage the PLA-407	19
1.4 Security	19
1.4.1 Passwords	20
1.4.2 Setting Up Security	20
1.5 Multiple Networks	21
Installing the Utility	23
2.1 Overview	23
2.2 Installing the Utility	23
Managing the PLA- 407	27
Firmware Tool	29
3.1 Overview	29
3.2 Firmware Upgrade Tool	29
The ENCRYPT Button	31
4.1 ENCRYPT Button Overview	31
4.2 Set Up a HomePlug AV Network with ENCRYPT	31
4.2.1 Expanding the Network with ENCRYPT	33
4.3 Setting Up Multiple Networks	33
4.4 ENCRYPT Button Behavior	36
The Configuration Utility	37
5.1 Overview	37
5.1.1 Powerline Network Security	37
5.1.2 Device Access Key (DAK)	38
5.2 Starting the Configuration Utility	38
5.3 Configuration Screen	39
5.4 Firmware Screen	41
5.5 Network Info Screen	41
5.6 Advanced Screen	43
5.7 About Screen	46
The OS X Configuration Utility	47
6.1 Overview	47
6.1.1 System Requirements	47
6.1.2 Start the Configuration Utility	48
6.1.3 Add a Device	48
6.1.4 Change Network Name	48
6.1.5 Change Nickname	49
6.1.6 QoS Settings	49
6.1.7 Set HomePlug Light Color	51
6.1.8 Link Information	52
6.1.9 Download Firmware	54
6.2 Firmware Detection Tool	54
6.3 Firmware Upgrade Tool	56
6.3.1 Notes on Upgrading Firmware	56
6.3.2 Procedure to Upgrade Firmware	56
Powerline Network Setup Tutorial	61
7.0.1 Overview	61
7.0.2 Important Terms	62
7.0.3 Accessing Your Powerline Adapter	62
7.0.4 Adding a Powerline Adapter	63
7.0.5 Setting Up a New Network with a New Adapter	65
7.0.6 Splitting a Network into Two Networks	67
7.1 Troubleshooting	70
PLA Compatibility	71
8.1 Overview	71
8.2 Firmware and Utility Compatibility	71
8.3 Compatibility Diagrams	72
8.4 Chipset Compatibility	73
Appendices and Index	75
LEDs and Troubleshooting	77
9.1 LEDs	77
9.2 Power and Light Problems	79
9.3 Configuration Utility Problems	81
9.4 Powerline Problems	81
9.5 ENCRYPT Button Problems	82
Product Specifications	85
Legal Information	89