1996 Ford Windstar Owner's Manual - Page 142

Resetting the Speed Control To reset the speed control to a lower speed, use one of the following procedures: s COAST - Press and hold the COAST switch. Release the switch when the vehicle slows down to the desired speed. s Lightly tap the brake pedal. When the vehicle attains the desired speed, press the SET ACCEL switch and release it immediately. s TAP-DOWN - Press and then quickly release the COAST switch. Each time you "tap" the switch, the set speed will decrease by 1 mph (1.6 km/h). Multiple taps will cause the set speed to decrease in increments of 1 mph (1.6 km/h). For example, if the current set speed is 60 mph (97 km/h) 5 taps of the COAST switch will decrease the vehicle speed and SET it at 55 mph (88 km/h). If vehicle speed is reduced below 30 mph (50 km/h) by any of the above methods, then you must manually accelerate to a speed over 30 mph (50 km/h) and reset the system. To reset the speed control to a higher speed, follow one of these procedures: s ACCEL - Press and hold the SET ACCEL switch. Release the switch when the vehicle has accelerated to the desired speed. s Depress the accelerator pedal. When the vehicle attains the desired speed, press the SET ACCEL switch and release it immediately. 140